Description
Lee Basin Mixer Tap
The Lee Basin Mixer Tap is a beautiful modern chrome basin mixer that comes with a ceramic disc valve for long lasting reliability. This tap is designed to be mounted on any standard bathroom basins that have a single hole. It is controlled with a single handle for flow and temperature and comes with flexible hoses as standard for ease of installation. An aerator is installed to give a nice splash free flow. These attributes make the Lee a great choice for any bathroom!
[smart-product id=”3050″ width=”500″ interval=”100″ fullscreen=”true” color=”light-blue” style=”flat-round”]
- Modern Basin Mixer Tap
- Comes with a 3 year warranty
- Brass body and beautiful chrome finish
- Ceramic Disc cartridge – Tested to 500k open & close cycles without leaking
- Will fit any standard basin with 1 mounting hole
- Comes with Flexible Tails for easy installation (1/2″ BSP threaded Connection)
- Contains a small hole at the bottom rear of the tap for a Pop Up Waste lever. If you are not using a Pop Up Waste then the hole is rear facing and will not be seen.
- 48 Hour dispatch from Ireland (all of our stock is dispatched from Ireland)
- Comes with an Aerator as standard for a nice spray free laminar flow
- Comes with all the fixings required to fit your tap
Click here for instruction: 100012
Any questions or queries or would you like more information?
Please feel free to Whatsapp our same day support business account on:
089 2568267 – from inside Ireland
00353 89 2568267 – from outside Ireland
| SKU: | 100012 | Range: | Fuarte Lee |
| Type: | Basin Mixer | Height: | See images |
| Finish: | Chrome | Width (Spout to Base): | See images |
| Warranty: | 3 Years | Base Depth: | See images |
| Material: | Brass Body | Min Pressure: | 0.5 Bar |
| Water Control Type: | Ceramic Disc Valve | Max Pressure: | 5.0 Bar |
| Fitting: | Deck Mounted with 1/2" BSP Flexi Tails | Max Temperature: | 80 °C |
| Flow Type: | Standard Aerator | Category: | Basin Taps |
Eugene (verified owner) –
Honestly I have to say the dispatch service from The Tap Shop must be the fastest turn-around I have ever witnessed hands down.
No sooner had I placed my order when I received an email saying it was being processed.
Within 3 days I was fitting the mixer taps and blanking cap to my old sink.
As you can see from the attached photo everything went perfectly well and it’s in daily use now, no more scalded hands.
I just needed to enlarge the hole to accommodate the flexible pipes with a ceramic hole saw.
Total time of 2 single taps to mixer conversion about one and half hours.